Limb Beaver “Baby Beaver”: A Better Way – Faster, More Productive & Safer!

The traditional way of using chainsaws and ladders to clear limbs and brush are considered ancient methods. We are introducing the Limb Beaver “Baby Beaver” for your Mini Loader – a highly productive attachment that will cut 3-inch limbs and dense brush!

Cost-Effective

You will be amazed at the reasonable prices, plus these are all 100% made in the USA with US Steel! The Baby Beaver model is a highly cost-effective solution compared to other attachments. This innovative solution is very impressive when you see it working in action.

  • High reach up to 198 inches!
  • Transport folded position of 19″L X 64″W X 59″H
  • 265 lbs.
  •  Small footprint – easy to move around!
  • Ready for big tasks!

The following limited warranty applies to products, parts and attachments (“Equipment”) manufactured and sold by SOLARIS MARKETING NW, LLC dba SOLARIS ATTACHMENTS (“SOLARIS”).  

Subject to the terms and limitations herein, SOLARIS warrants that the Equipment will (a) conform to the design and specifications, if any, expressly agreed to in writing by SOLARIS; and (b) be free from defects in workmanship and materials for a period of two years from the date of delivery, provided that the Equipment is properly operated under conditions of normal use and subject to regular periodic maintenance.  SOLARIS’ obligation under this warranty is limited to repairing or replacing Equipment that is returned in accordance with the procedure set forth below.  

This warranty extends only to buyers who purchased the equipment directly from Solaris, or one of its dealers as new merchandise.  The warranty does not apply to attachments or components that are not manufactured by SOLARIS, though they may be covered by the manufacturer’s warranty. 

This warranty shall not apply to normal wear or to damage resulting from accident, abnormal use, misuse, abuse, or neglect, or to any attachments that have been improperly applied, improperly installed or modified without written authorization from SOLARIS. SOLARIS makes no warranty of merchantability or of fitness for a particular purpose in respect to this equipment.  SOLARIS shall not be liable for any injury or damage to any person, place, or thing by reason of the installation, use or mechanical failure of any Equipment, nor any special, indirect, incidental or consequential damages of any kind, whether arising in tort or in contract.

WARRANTY REPLACEMENT PROCEDURE

All Equipment subject to a warranty claim must be tagged with an RGA (returned goods authorization) number. To obtain an RGA number, contact SOLARIS with the model and ID number of equipment and a brief description of the part being returned. Upon receipt at Eldorado, IL, shipping prepaid by customer, the part will be inspected. If inspection indicates failure was due to defect of material or workmanship, and the part failed during the warranty period, the part will be repaired or replaced and shipped prepaid by SOLARIS via ground service. SOLARIS retains the sole and final discretion to determine whether the Equipment is defective.  The option of repair or replacement will be at the discretion of SOLARIS. SOLARIS reserves the right to make design and specification changes on replacement parts.

If a warranty or exchange part is not received within 30 days after the RGA is issued, the customer must pay for the part.  No warranty consideration will be given on parts not tagged with an RGA number.  No warranty consideration will be given on parts showing evidence of tampering or disassembly.

SOLARIS SHIPPING INFO: c/o Warehousing Pros 2600 Hart Street, Nashville, TN 37207

GOVERNING LAW, FORUM, AND VENUE

This agreement and the rights and obligations of the parties hereunder shall in all respects be governed by the laws of the State of Washington (without regard to the conflict-of-laws principles of such state). In the event of litigation arising out of or relating to this Agreement, the exclusive forum, venue and place of jurisdiction shall be in the state of Washington.

Download Product Guide

The Baby Beaver BB 4 model is a lightweight limb cutter for compact tractors and mini loaders with an amazing amount of reach capability. As indicated on the Baby Beaver’s product guide, many needs have been addressed and added to the Limb Beaver product line.

The new ‘Baby Beaver’ model allows the operator to cut limbs vertically and horizontally, including 45 degrees below horizontal. This little guy has a huge appetite with a 3-inch and down-diameter specification, which is a conservative estimate. Many customers are giving us feedback that they can cut limbs much larger than that!

Watch the Solaris Limb Beaver ‘Baby Beaver’ in Action in this video:

Apply for 3-Minute Financing!

Ready to Get a Quote?

Preferred Method of Contact:
Thank you for your message. It has been sent. We typically respond on the same business day.
There was an error trying to send your message. Please try again.