AUGERS // S5: 4.5MT – 8MT

The S5 range of Solaris augers has been specifically designed for High Flow Skid Steer Loaders, Telehandlers, Truck Cranes, Backhoes, and Excavators up to 8MT.

Built from high-grade steel, these augers incorporate many features that will allow you to work more efficiently making your job easier. Shallow pitch flights ensure they cut with maximum efficiency and importantly keep the spoil on the flights when removed from the hole. With several wear-part combinations, these augers can cater to soft grounds through mixed rocky grounds and even permafrost. Heavy duty tubes, constant spiral cut, as well Solaris Auger Torque’s unique Shock Lock™ Tooth Locking System (rock augers excluded) have given these augers their industry-leading reputation. The standard shaft for the Solaris S5 range is 2.5″ Hex (Also available with a range of fixed and telescopic extensions). This range of Solaris augers can be prepared to be hard facing for harsh environments upon request.

HUB OPTIONS

Augers are available with all major standard hubs on the market including 2” 2.5”, 3” and 4” Hex, 50mm, 2” and 65mm round plus 57mm, 75mm, 100mm, 110mm, and 130mm square to name a but a few!

HEAVY DUTY TUBE

We know that our augers can expect a tough life, so we only use the highest-grade steel and vary our tube size according to machine size and application. Our augers have a reputation for being the toughest on the market.

SHALLOW PITCH FLIGHTS

By working with and more importantly listening to operators in the field, we have developed the perfect pitch for our flights, ensuring the spoil will stay on your auger when you remove it from the hole, giving you maximum efficiency on the job.

CONSTANT SPIRAL CUT

Our boring heads are designed with a constant spiral cut. Teeth are located so that each makes its own fresh cut on every revolution and are angled to direct spoil towards the center of the auger. The tooth-cutting angle ensures spoil is broken up thoroughly to avoid any clogging.

PILOT AND TOOTH OPTIONS

Our augers are offered with many different tooth and pilot options to suit your specific need. For example, in the S4 range, we offer up to eight different combinations and we have the know-how to help you select the optimal configuration.

SHOCK LOCK™ TOOTH LOCKING SYSTEM

The patented Auger Torque shock Lock™ tooth locking system makes losing teeth a thing of the past. The shock lock pin and rubber in our unique shock lock tooth holders ensure your auger teeth are safely locked in place and protected against shock fractures. Replacing worn teeth is simple, just knock out the old pin with a standard hole punch and the tooth will slide out of the holder with ease. You will never need to worry about fitting spare teeth due to losing them again.

With our patented Shock Lock™ Tooth Locking System tooth loss is now a thing of the past.

Using the Shock Lock™ pin and rubber in our unique Shock Lock™ tooth holders ensures your Auger’s teeth are safely locked in place and protected against shock fractures.

Replacing worn teeth is a breeze with this system, simply knock out the old pin with a standard hole punch and the tooth will slide out of the holder with ease. Acclaimed as the best system on the market you will never need to worry about fitting spare teeth due to losing them again.

NamePriceBuy
S5: 4.5MT - 8MT Augers$751.00$2,842.00
S5 Auger Extensions$489.00$678.00

S5 Auger Flight Length (inches)

Dia 4″ 6″ 8″ 9″ 10″ 12″ 14″ 16″ 18″ 20″ 24″ 30″ 32″ 36″ 40″ 48″ 60″
S5 43 39 39 39 36 35 30 30 30 28 28 28 21 21

Extensions

Fixed Telescopic
20in 40in 5ft 6ft6 8ft 10ft 5ft 6ft6 10ft
S5

Solaris S5 Range Auger Gallery

Apply for 3-Minute Financing!

Ready to Get a Quote?

Preferred Method of Contact:
Thank you for your message. It has been sent. We typically respond on the same business day.
There was an error trying to send your message. Please try again.
thumbnail_Solaris_Logo_Horizontal_124