Solaris SB Demolition Hammers
The SB range of Demolition Hammers has been designed to give you the ultimate in versatility, reliability, and efficiency. Suitable for 0.5-12 Ton excavators, skid steers, and backhoes, and with a range of tool options, these hammers make easy work of planting fence posts through to demolishing concrete and rock, breaking asphalt and pathways, and light quarry tasks. The SB Hammers are made of high-grade steel and consist of a simple but ingenious design with only two moving parts. The cartridge design without tie rods makes it extremely quiet, allowing operators to work longer hours and complete contracts in shorter time frames.
▼▼▼ SCROLL DOWN TO LEARN MORE ▼▼▼
Meet the Solaris SB Demolition Hammers
As with all our attachments, Solaris has spared no expense and time to curate the best manufacturer in every category. We firmly decided that Augertorque builds the most cost-effective, quality demolition attachments for your mini-excavator or backhoe.
If you are a dealer or contractor looking for a quality, reliable, cost-effective hammer for your skid steer or mini excavator, then look no further than the Solaris SB Hammer.
MONOBLOC BODY CONSTRUCTION
- Solid-body construction. No tie rods
- High resistance to leverage during operation
- Maintenance is greatly reduced
INTERCHANGEABLE PISTON CYLINDER LINER
- Easy to replace if required
- No interruption of the main body
DOUBLE PIN TOOL LOCKING SYSTEM
- Uniform wear to the tool
- Longer maintenance intervals
NITROGEN ENERGY RECOVERY
- 30% more power
- Less vibration
- No internal diaphragms
UPRATED NITROGEN CHAMBER SEALS
- New technology minimizes nitrogen loss
- Greatly reduces nitrogen gas refills
PROTECTIVE TUBING CASE
- Hydraulic tubing protected by the outer case
- Closed box casing
- Sound absorbing construction
- Noise levels kept to a minimum
The following limited warranty applies to products, parts and attachments (“Equipment”) manufactured and sold by SOLARIS MARKETING NW, LLC dba SOLARIS ATTACHMENTS (“SOLARIS”).
Subject to the terms and limitations herein, SOLARIS warrants that the Equipment will (a) conform to the design and specifications, if any, expressly agreed to in writing by SOLARIS; and (b) be free from defects in workmanship and materials for a period of two years from the date of delivery, provided that the Equipment is properly operated under conditions of normal use and subject to regular periodic maintenance. SOLARIS’ obligation under this warranty is limited to repairing or replacing Equipment that is returned in accordance with the procedure set forth below.
This warranty extends only to buyers who purchased the equipment directly from Solaris, or one of its dealers as new merchandise. The warranty does not apply to attachments or components that are not manufactured by SOLARIS, though they may be covered by the manufacturer’s warranty.
This warranty shall not apply to normal wear or to damage resulting from accident, abnormal use, misuse, abuse, or neglect, or to any attachments that have been improperly applied, improperly installed or modified without written authorization from SOLARIS. SOLARIS makes no warranty of merchantability or of fitness for a particular purpose in respect to this equipment. SOLARIS shall not be liable for any injury or damage to any person, place, or thing by reason of the installation, use or mechanical failure of any Equipment, nor any special, indirect, incidental or consequential damages of any kind, whether arising in tort or in contract.
WARRANTY REPLACEMENT PROCEDURE
All Equipment subject to a warranty claim must be tagged with an RGA (returned goods authorization) number. To obtain an RGA number, contact SOLARIS with the model and ID number of equipment and a brief description of the part being returned. Upon receipt at Eldorado, IL, shipping prepaid by customer, the part will be inspected. If inspection indicates failure was due to defect of material or workmanship, and the part failed during the warranty period, the part will be repaired or replaced and shipped prepaid by SOLARIS via ground service. SOLARIS retains the sole and final discretion to determine whether the Equipment is defective. The option of repair or replacement will be at the discretion of SOLARIS. SOLARIS reserves the right to make design and specification changes on replacement parts.
If a warranty or exchange part is not received within 30 days after the RGA is issued, the customer must pay for the part. No warranty consideration will be given on parts not tagged with an RGA number. No warranty consideration will be given on parts showing evidence of tampering or disassembly.
SOLARIS SHIPPING INFO: c/o Warehousing Pros 2600 Hart Street, Nashville, TN 37207
GOVERNING LAW, FORUM, AND VENUE
This agreement and the rights and obligations of the parties hereunder shall in all respects be governed by the laws of the State of Washington (without regard to the conflict-of-laws principles of such state). In the event of litigation arising out of or relating to this Agreement, the exclusive forum, venue and place of jurisdiction shall be in the state of Washington.
Click the above image to view larger.