Solaris Excavator Augers 21T - 50T

Product Line // Solaris Excavator Augers 21T – 50T

Earth Drill 100,000 MAX and 150,000 MAX are part of the heavy-duty range in the Solaris-Auger Torque product lineup – suitable for excavators between 21T- 50T.



Submit an online quote request today.

Submit Quote Request

Meet the Solaris Earth Drill Range: For Excavators 21T to 50T

Having surveyed the market & through our frequent and direct collaboration with operators specializing in large screw pile and hard rock drilling applications, we are excited to release the Earth Drill 100,000 MAX and 150,000 MAX globally. A perfect choice for excavators between 21-50T, this drive unit is geared towards high torque applications. With a weight of just over 1T (1.5T for 150MAX) we have managed to keep the weight down for versatility whilst not sacrificing any of the robustness our drives are renowned for. Running a massive 150mm HEX shaft we are confident it will stand up to the toughest of applications time & time again.

MODEL 100000 MAX 150000 MAX
Carrier Weight 21-50T 21-50T
Torque Range 33,741-73,807 ft-lb 52,868-112,344 ft-lb
Oil Pressure Range 2321-5076 psi 2321-4931 psi
Oil Flow Range 26.4-74.0 gpm 26.4-89.8 gpm
Speed Range 5-15 rpm 4-12 rpm
Hub Options 5.9 inch Hex 5.9 inch Hex
Unit Height 63.90 inch 73.35 inch
Unit Diameter 25.04 inch 30.16 inch
Unit Weight 2339 lbs 3287 lbs
Hitch Options Double Pin Cradle Hitch Double Pin Cradle Hitch
Valve Options 2 Way Valve – Converts single-acting hammer into a 2-way auxiliary flow.  2 Way Valve – Converts single-acting hammer into a 2-way auxiliary flow.


  • Up to 100,069 Nm of Torque
  • Up to 15 rpm rotational speed
  • Massive 150mm Hex Shaft
  • Large main shaft bearings
  • Non-Dislodgement Shaft
  • Life time non-dislodgement guarantee
  • Low-weight at just over 1T
  • Single-piece driveshaft
  • Compatible with AT Alignment Monitors


  • Large diameter & deep auger drilling
  • Hard Rock Auger drilling
  • Core barrel drilling
  • Pole and mast installations
  • Foundation piles
  • Large diameter screw pile installations
  • Rail applications
  • Exploration & Research
  • Compatible with excavators from 21T onwards allowing for low impact and reasonably tight access application where typically larger machines would have to be used.

Download Our Product Sheet PDF:

Coming Soon
Solaris Excavator Augers 21T - 50T
Solaris Excavator Augers 21T - 50T

Ready to Get a Quote?

Preferred Method of Contact:
Thank you for your message. It has been sent. We typically respond on the same business day.
There was an error trying to send your message. Please try again.