Solaris Cangini Excavator Brush & Limb Cutter

The Solaris Cangini Excavator Brush & Limb Trimmer  is the toughest on the market!

Do you need something more than a flail mower, but forestry mulchers are too expensive? We have your solution!

Check out our video for proof that the rugged Solaris Brush and Limb Trimmer can clear up to 4” trees and brush with efficiency.  Save time and simplify cleanup with one tough attachment.

  • HB400 Blade – Tough & wear resistant
  • 4-line hydraulic slewing ring
  • Swivel joint
  • Unbeatable strength & agility
  • Sharp precision cuts

The following limited warranty applies to products, parts and attachments (“Equipment”) manufactured and sold by SOLARIS MARKETING NW, LLC dba SOLARIS ATTACHMENTS (“SOLARIS”).  

Subject to the terms and limitations herein, SOLARIS warrants that the Equipment will (a) conform to the design and specifications, if any, expressly agreed to in writing by SOLARIS; and (b) be free from defects in workmanship and materials for a period of two years from the date of delivery, provided that the Equipment is properly operated under conditions of normal use and subject to regular periodic maintenance.  SOLARIS’ obligation under this warranty is limited to repairing or replacing Equipment that is returned in accordance with the procedure set forth below.  

This warranty extends only to buyers who purchased the equipment directly from Solaris, or one of its dealers as new merchandise.  The warranty does not apply to attachments or components that are not manufactured by SOLARIS, though they may be covered by the manufacturer’s warranty. 

This warranty shall not apply to normal wear or to damage resulting from accident, abnormal use, misuse, abuse, or neglect, or to any attachments that have been improperly applied, improperly installed or modified without written authorization from SOLARIS. SOLARIS makes no warranty of merchantability or of fitness for a particular purpose in respect to this equipment.  SOLARIS shall not be liable for any injury or damage to any person, place, or thing by reason of the installation, use or mechanical failure of any Equipment, nor any special, indirect, incidental or consequential damages of any kind, whether arising in tort or in contract.


All Equipment subject to a warranty claim must be tagged with an RGA (returned goods authorization) number. To obtain an RGA number, contact SOLARIS with the model and ID number of equipment and a brief description of the part being returned. Upon receipt at Eldorado, IL, shipping prepaid by customer, the part will be inspected. If inspection indicates failure was due to defect of material or workmanship, and the part failed during the warranty period, the part will be repaired or replaced and shipped prepaid by SOLARIS via ground service. SOLARIS retains the sole and final discretion to determine whether the Equipment is defective.  The option of repair or replacement will be at the discretion of SOLARIS. SOLARIS reserves the right to make design and specification changes on replacement parts.

If a warranty or exchange part is not received within 30 days after the RGA is issued, the customer must pay for the part.  No warranty consideration will be given on parts not tagged with an RGA number.  No warranty consideration will be given on parts showing evidence of tampering or disassembly.

SOLARIS SHIPPING INFO: c/o Warehousing Pros 2600 Hart Street, Nashville, TN 37207


This agreement and the rights and obligations of the parties hereunder shall in all respects be governed by the laws of the State of Washington (without regard to the conflict-of-laws principles of such state). In the event of litigation arising out of or relating to this Agreement, the exclusive forum, venue and place of jurisdiction shall be in the state of Washington.

You can choose from a range of five different models to match your excavator.  Choose the cutter to work with as small as a 2.5 metric ton machine (5,500 lbs.) on  up to a 14 metric ton excavator (31,000 lbs.).  We are confident that you will be thrilled with the price without any compromise in quality or customer service.

Each unit is delivered complete with a mount to fit your excavator (specify whether you have straight pins, a pin-grabber, or a coupler).

The advantage of this innovative brush & limb cutter is its efficient clearing of stubborn, dense brush & small trees, and the clean jobsite it will leave behind!

Ask us about financing options and let’s get you on the road to getting your projects done reliably.

Check out the video of our amazing Solaris Excavator Brush & Limb Cutter and speak to one of our expert consultants today!

Download Product Guide
Apply for 3-Minute Financing!

Ready to Get a Quote?

Preferred Method of Contact:
Thank you for your message. It has been sent. We typically respond on the same business day.
There was an error trying to send your message. Please try again.